Is it possible to use the S2400 as a master and the Torso t1 sequencer as a slave via clock? The S2400 uses 96ppqn and the torso 2, 4,8, 12, 16, 24 ppqn.
Thanks!
Yes this possible. I would recommend sending clock from the s2400 via the 3,5mm clock out socket into the clock input of the torso. In this way you can adjust the clock on the s2400 to 96, 48, 24, or 12 PPQN, or 16th or 8th notes or just run/stop. With clock via midi it’s not possible to adjust the ppqn. I hope this helps.
Thanks a lot i ll try asap!
Best regards