Hey, after I rebooted, I re-downloaded the new update on the sd card and it updated the firmware. Everything is working as normal now. Thanks…
2 Likes
the gain issue isn’t 100% fixed, the bug comes back after entering and exiting the waveform editor
Can anyone else confirm if step sequencing from an external MIDI keyboard works now on the MIDI tracks?
It does not. Neither in midi focus mode or changing controller’s midi channel, I can’t get notes into step edit.
Ugh. I wonder why this keeps getting overlooked. Right now I have to play it live and then use step mode to shift/copy notes and it’s so frustrating.
Yeah, it’s an odd one. Will make a ‘feature’ request if there isn’t one already
I’ve requested it for a while.
S2400 Firmware Update Instructions
Download the desired firmware update file from the following posts.
DO NOT interfere with the machine until it reboots.
Copy the file to the ROOT of your SD card
HINT: You can just enter USB MSC mode on the S2400 and the machine will appear as a drive to your computer, press the BACK button on the S2400 once the file has copied.
Upon re-inserting card or exiting MSC mode you will be prompted to go ahead with the update.
Emergency / Firmware Recovery Procedure
If for any reason, due to power cut, or other failure, your machine won’t boot afterwards, remove the SD card and insert into a computer.
Copy the downloaded file onto the ROOT of the SD card but this time, rename the file extension to .UPF instead of the default .UPD (This will perform a forced update on power up)
Re-insert the card into the machine with the power off, and then power on.
THE MACHINE WILL APPEAR DEAD FOR A COUPLE OF MINUTES WHILE IT PERFORMS A FORCED UPDATE