Hi, so I loaded a LiveFX config into an older project that was using Multiple Outs. I unplugged them and used the main outs. went to the LiveFX mixer. as I pressed each pad, they lit Solid WHITE and when Pressed showded Green. The FX where not working properly at all. It did not have the same settings I had saved. I had to redo all adjustments in order to hear them work properly.
Also, I loaded a Busses Config, which loaded with Corrupt Character names and therefore corrupt audio playback so they did not work at all.
PS: Brad or Rob:
There is no way to have LiveFX and use the Multi-Outputs? it only runs on MainOuts ,right?
And Individual Outs AND MainOutputs can’t co-exist at the same time because the hardware mimics the SP routing.
So there is no way to record “audio” record 8 channels and Main channels using Live FX at same time… You would have to record your individual 8 tracks with LV2 on them, then unplug the outs and use the mainouts to record a stem with Live FX?
If this is the case ( and ideally not having to use USB audio as a work around), then it’s essential that LiveFX plugins become available/purchasable for us to load into Busses and individual Channels. 