Currently, the main display shows the fader position of wherever the slider was physically last left off at (within that fader mode). This means that display does not (necessarily) show a fader position that matches what you are actually hearing within that pattern.
An alternative display option would show the pattern modified position, i.e. the fader position that was “baked into” that pattern number.
Example: For simplicity sake let’s say we are just dealing with a loop on track 1 in pitch mode. The first pattern the pitch is all the way up. The second pattern the pitch is midway. The third pattern the pitch is all the way down. As I advance from the first to third pattern the display will also show the fader position going down.
Hopefully this makes sense- I am happy to elaborate on this.
