Large file CAN loop enable, but display issues [FIXED 458]

S2400 Bug Reports
1

If have made a default project with a very short sample assigned to each track. When I assign a new sample to a track (which is longer by default), loop is enabled, even though the sample is larger than 2mb.

The second row of the waveform display is corrupted. Probably because a large sample cannot have a loop normally and the software cannot handle this.

2
  • New project
  • Assigned a very short sample to A1
  • Duplicated A1 to A2 (org. tracks)
  • Set loop on for A2
  • Assigned the sample to A3 also
  • Set loop on for A3
  • Now I loaded longer (>2MB) sample on A1, A2 and A3

The problem can be seen in the waveform view of A2 and A3.



MIDItracks.map (7.2 KB)
ProjectTST03.KIT (6.5 KB)
ProjectTST03.S24 (14.5 KB)

3

This behavior has also shown me a way to crash the machine. I think this may have been reported before.

To crash do the following:

  • Using the above statements or project, make sure you have a sample bigger than 2MB with the loop enabled
  • Go into multimode
  • Look for a slice that also has loop enabled (some of them do, some don’t)
  • Save this slice to a new sample (you cannot)
  • Look at the screen you never saw before
4

Confirmed, thanks again @syah71 :+1: